|Structure:||Horizontal||Plasticizing Way:||Screw Type|
|Automation:||Automatic||Clamping Way:||Hydraulic & Mechanical|
|Injection Weight:||260~368g||Opening Stroke:||430mm|
|Space Between Tie Bars:||460*460(mm*mm)||Special:||Special For Pen|
1600KN Horizontal Ball Pen Manufacturing Machine Servo System 430MM Opening Stroke
LOG-160S8 Injection Molding Machine For Plastic Pen
1. Servo System:
Use servo motor oil-electric composite structure, with the characteristics of high precision, high response, low noise, excellent energy-saving performance,high response servo motor.
Compared to the traditional hydraulic injection molding machine response speed significantly accelerated, effectively shortening the cycle and improve production efficiency.Servo energy-saving injection molding machine to achieve the maximum output of only 0.05s.
The Characteristic Of LOG-160S8 Plastic Pen Injection Molding Machine
■ The Hydraulic Units
Saves power by 30%~60%.A motor with same power may be fitted with an oil pump of bigger displacement and thus accelerates the speed of machine.Besides,the low oil temperature will prolong the service life of sealing elements.
■ The Injection Units
The strain free fixed mold plate and screw assembly with optimized design help to reach better plasticing capacity and effect.Auto material preparation,drooling proof,and anti cold start lapse functions ensure the high efficent,simple and safe operations.
■ The Clamping Parts
As compared with similar machines,it owns bigger internal spur between tie bars,mold space and mold opening stroke and may process plastic products of bigger size.
■ The Mould Adjusting Units
The automatic mold adjusting device driven by hydraulic motor adopts gear coupling drive,features steadiness,speedinees,high-efficiency and saving mold loading time.
■ Computer Controller PLC
Adopting double CPU control makes high speed.
Professional injection moulding machine controller with software and hardware of industrial standard is convenient to expansion and revision of performance.
■ Economizing on electricity: Electric motor energy is carried out according to need. For high-precision products with long holding time and thick wall thickness, energy electricity can be economized 25%-80%.
■ Precision: Products re-precision is once higher than usual injection molding machine.
■ Control: Double closed circular control makes the pressure and speed equaler.
■ Economizing on water: The cooling water can be economized greatly when the surrounding temperature is below 30 degrees.
■ Low noise: The noise is very low during the non-high-pressure situation.
2. LOG160S8 Plastic Pen Injection Molding Machine Parameters
|Shot weight (ps)||G||260||298||368|
|Max injection rate||cm³/s||122||140||172|
|Screw L:D ratio||22:1||20:1||18:1|
|Space between tie bars||MmXmm||460*460|
|Mold thickness (Min--Max)||Mm||180~500|
|Hydraulic ejection stroke||Mm||140|
|Hydraulic ejection force||Kn||50|
|Hydraulic system pressure||Mpa||17.5|
|Number of temp control zones||4+ (nozzle)|
|oil tank capacity||L||210|
3. LOG160S8 Plastic Pen Injection Molding Machine Instructions:
Hand in hand with Log machine,we can together go further!