|Structure:||Horizontal||Plasticizing Way:||Screw Type|
|Automation:||Automatic||Clamping Way:||Hydraulic & Mechanical|
|Clamping Force:||6500KN||Injection Weight:||1966~3072g|
|Opening Stroke:||920mm||Space Between Tie Bars:||930*900(mm*mm)|
Double Carriage Cylinder Automatic Injection Moulding Machine 6500KN 3000G Shot Weight
LOG-650S8 Injection Molding Machine
1. In view of different material and applications we supply variety of screw and barrel for customer choice.
2. Injection unit adopts linear guide rail built-in carriage cylinder and integral casting support, thus enhence its rigidity and make the compact structure.
3. Double-carriage cylinder is adopted to ensure stable injection.
4. Increase the speed and saves power from20%~50%depending upon the molding Double-carriage cylinder is adopted to ensure stable injection.
5. New design small volume with high efficient heat exchanger maintains the hydraulic oil temperature stable.
6. Adopt special macromolecule wear-rwsisting and self lubricating platen guides, can easily adjust the height.balance the weight, durable and clean.
7. Optimized template design, improve the rigidity and precision of mold open/closing.Adopt special macromolecule wear-rwsisting and self lubricating platen guides, can easily adjust the height.balance the weight, durable and clean.
8. Latest design invisible and adjustment free mechanical safety interlock device safety and decreases exposure.
9. A hydraulic motor drives a planetary gear to ensure perfect and rigid mold height adjustment.
10. Programmable central lubrication system for high efficiency and low maintenance and extended toggle life.A hydraulic motor drives a planetary gear to ensure perfect and rigid mold height adjustment.
11. High performance self lubricating graphite impregnated bearing enhances the performance of both toggle and sliding parts. Reduction is maintenance cost and time lesser use of lubrication oil and there by decrease in pollution and clean environment.
LOG650S8 Machine Parameter
|Shot weight (ps)||G||1966||2488||3072|
|Max injection rate||cm³/s||420||531||656|
|Screw L:D ratio||22:1||21:1||19.5:1|
|Space between tie bars||MmXmm||930*900|
|Mold thickness (Min--Max)||Mm||350~910|
|Hydraulic ejection stroke||Mm||265|
|Hydraulic ejection force||Kn||182|
|Hydraulic system pressure||Mpa||17.5|
|Number of temp control zones||6+ (nozzle)|
|oil tank capacity||L||1500|
650 Clamping Unit