|Structure:||Horizontal||Plasticizing Way:||Screw Type|
|Automation:||Automatic||Clamping Way:||Hydraulic & Mechanical|
|Injection Weight:||1494~2397g||Opening Stroke:||820mm|
|Space Between Tie Bars:||830*830(mm*mm)||Special:||Special For PPMA|
Auto Plastic Chair Making Machine , 5000 KN Plastic Injection Molding Equipment
LOG-500S8 Injection Molding Machine For PMMA Cosmetic
1. The Characteristic Of LOG-500S8 PMMA Cosmetic Injection Molding Machine:
The control system realizes the oil pressure closed loop and the electrical machinery rotational speed closed loop, high repeatedly, the linearity is good, reduces the rate of unqualified products, the response speed is quick, raises the production efficiency, thus the overall control precision enhances, with low noise, low concussion , prolongs the injection molding machine use life. High rigidity modular design, Installed both T-slot and conventional threaded hole, easy to install the mold. Equipped with high-performance precision oil filter device, it can make the oil-pollution grade within in NAS8 level or less; Using Taiwan Techmation / Mirle color control system.
■ High energy-saving:
Using Techmation servo system, in the ideal situation, compare to variable pump system, saving 40% electricity, compare to fixed pump system,saving 70%, effective save energy costs.
■ High response:
Stable performance of the servo motor, with high precision, high sensitivity of the pressure feedback device, forming a closed-loop precision control, effectively shorten the cycle and improve production efficiency.
■ Low temperature rise:
The motor works only when needed, so it wont have excess heat, can reduce the over-heat phenomenon of oil system, effectively prevent oil temperature rise, the hydraulic system does not even need to cool, so that it can save water.
2. Optional Devices:
■ Exchange neighbouring clamping unit and injection unit
■ Special raw material plasticzing pieces
■ Special texture plasticizing pieces
■ Accumulator auxiliary rapid injection device
■ Hydraulic pressure core-pulling device
■ Maleand female air blowing device
■ Glass pipe water segregator
3. LOG500S8 PMMA Cosmetic Injection Molding Machine Parameters:
|Shot weight (ps)||G||1494||1919||2397|
|Max injection rate||cm³/s||357||459||573|
|Screw L:D ratio||23.8:1||21.1:1||18.7:1|
|Space between tie bars||MmXmm||830*830|
|Mold thickness (Min--Max)||Mm||300-820|
|Hydraulic ejection stroke||Mm||210|
|Hydraulic ejection force||Kn||111|
|Hydraulic system pressure||Mpa||17.5|
|Number of temp control zones||5+ (nozzle)|
|oil tank capacity||L||1150|
4. LOG500S8 PMMA Cosmetic Injection Molding Machine Instructions:
Never stop the step of developing, LOG MACHINE now is the top 5 in injection molding machine sphere, choose LOG MACHINE, Choose good quality!