|Structure:||Horizontal||Plasticizing Way:||Screw Type|
|Automation:||Automatic||Clamping Way:||Hydraulic & Mechanical|
|Injection Weight:||1494~2397g||Opening Stroke:||780mm|
|Space Between Tie Bars:||830*830(mm*mm)||Special:||High Speed|
5000KN Clamping System Injection Molding Machine Closed Loop Control With Servo System
LOG-500S8 Injection Molding Machine
1. The Characteristic Of LOG High Speed Special Injection Molding Machine
Clamping system: Faster response, stable and high rigidity
Injection system: Accurate and flexible, lower rejection rate
Control system: Computer and simple operation,molding data memory system
Power system: Energy saving, high efficient and precise
Metal parts: The thickness of our frame, metal plate and wallboard are thicker than other company.
Some of the important features:
■ High Speed
Machine adopts high precision single cylinder injection system, especially suitable for high speed injection with low-inertia and high response speed. Thin wall high speed injection machine can produce thin wall products more efficiency and production cycle time is more short.
■ High Energy Saving
Machine with high response servo system, machine output according to actual need, no overflow no waste. It can save power around 30-70%.Compared with traditional machines, we use servo motor to save energy consumption and at the same time control the position more precise.
■ High Safety
Thin wall high speed injection machine is with mechanical, hydraulic, electrical triple protection.
Security module independent control will be ensure that there is no mistake of machine closing, injection, charging, nozzle forward to avoid any accident.
And the high speed injection machine is specially developed for high speed and high precision injection molding. The machine frames, clamping units are much more stronger for high speed injection. And they are also very stable for high pressure working.
This kinds of high speed injection machine take advantages of high injection speed ,shorten running cycle time, work more efficiency and especially suitable for ultrathin, precious and complicated products.
Show High Precision: The accurate injection positioning, pressure, speed and pressure maintaining, to ensure the repeatability error of injection accuracy less than 0.3% to achieve precision molding.
Super EnergySaving Features: Compared with standard injection machine, the energy saving rate can reach 40%-70% for the same plastic production.
High Efficiency: Compared with standard machine, the total efficiency can increase by 10% and dragging capacity is can increase by18%.
High Response System: The system acceleration and deceleration performance is quite agile and force&speed regulation is very sensitive. The sampling processing speed can reach 100KHZ and system quick start time can reach 0.05s.
Maintain Stability and Reliability: The pressure or speed is stable and switch of pressure maintaining is smooth and accurate.
Low Oil Temperature: Avoid high pressure unloading and low oil temperature situation during operation. Improve the operation performance. promote using efficiency and save a large quantity of cooling water.
■ Closed-loop control system
■ Electronic ruler stroke control
■ Automatic lubrication system
■ Differential high pressure mold clamping
■ The independent nozzle temperature control
■ The oil temperature alarm device
■ Low pressure clamping protection device
■ High torque hydraulic motor
■ The servo motor and pump bigger power system
■ Mold-open and thimble linkage
■ More core pull
■ Widen the machine doors
■ Increase the mold space
■ Melt glue NC back pressure
■ The hydraulic safety insurance device
■ Longer nozzle
■ More air valve
■ Glass thermometer
■ Increase the injection Volume
■ Ceramic heating
2. LOG500S8 High Speed Machine Parameters
|Shot weight (ps)||G||1494||1919||2397|
|Max injection rate||cm³/s||392||504||630|
|Screw L:D ratio||22:1||21:1||18.7:1|
|Space between tie bars||MmXmm||830*830|
|Mold thickness (Min--Max)||Mm||300~820|
|Hydraulic ejection stroke||Mm||210|
|Hydraulic ejection force||Kn||111|
|Hydraulic system pressure||Mpa||17.5|
|Number of temp control zones||5+ (nozzle)|
|oil tank capacity||L||1150|
3 . LOG-500S8 High Speed Machine Features:
If you have any project need thin wall high speed injection machine, please feel free to contact us. We will offer you best solution for your thin wall high speed injection molding.
LOG MACHINE insist to the idea of making high-end production line.will give you an optimum resolution.