|Structure:||Horizontal||Plasticizing Way:||Screw Type|
|Automation:||Automatic||Clamping Way:||Hydraulic & Mechanical|
|Clamping Force:||2500KN||Opening Stroke:||520mm|
|Space Between Tie Bars:||560*530(mm*mm)|
Thermoplastic Injection Molding Machine 2500 Hydraulic Type with Double Cylinder System
LOG-250S8 Injection Molding Machine Detials
LOG can provide our clients with general-purpose screws to meet the diverse requirements, but also for different types of plastics and processing characteristics of the product, Konger offer special types of screws to meet high qualiy and high precision requirment.
Such as: UPVC, MPPA, PA, PC, CP, PPS, PET and other special screw.
Advanced hydraulic system design, through proportional control of pressure, flow achieves rapid multi-level pressure, speed switching, the system configuration is reasonable, stable and reliable. The noise is less. The medium and large machine adopts a two-way cartridge inserted valve system to improve the system of flow and speed of response and makes the whole machine reach the best performance.
Excellent Molding Stability
The servo driving system has its pressure and flow under closed loop control; and compared with traditional injection molders, its molding repetition precision is improved substantially.
Constant Oil Temperature
The servo motor output hydraulic oil proportionately to prevent excessive heat.It can achieve substantial water saving even without cooling.
The servo driver features rapid response whose rapid starting time is improved by 50% compared with traditional injection.
Substantial Energy Saving
Under the same conditions, it can save 20%-80% energy compared with traditional constant delivery pump injection molders.
High Performance Environmental Protection
The complete machine features low operating noise and even quieter during low-speed operation.
- A variety of text can be switched.
- Manual, semi-automatic and fully automatic mode.
- Automatic movement monitoring with alarm and fault diagnosis.
- Function of slope setting can set the start and stop of movements, so as ensure the smooth movement
LOG-250S8 injection molding machine spesification
|Shot weight (ps)||G||464||625||785|
|Max injection rate||cm³/s||175||236||297|
|Screw L:D ratio||22:1||21:1||18.7:1|
|Space between tie bars||MmXmm||560*530|
|Mold thickness (Min--Max)||Mm||200~580|
|Hydraulic ejection stroke||Mm||150|
|Hydraulic ejection force||Kn||67|
|Hydraulic system pressure||Mpa||17.5|
|Number of temp control zones||4+ (nozzle)|
|oil tank capacity||L||380|