|Structure:||Horizontal||Plasticizing Way:||Screw Type|
|Automation:||Automatic||Clamping Way:||Hydraulic & Mechanical|
|Clamping Force:||6500KN||Injection Weight:||1966-3072|
|Opening Stroke:||920mm||Space Between Tie Bars:||930*900(mm*mm)|
|Special:||Special For PMMA Cosmetic|
650 Tons Servo Motor Plastic Injection Molding Machine 920mm Opening Stroke
LOG-650S8 Injection Molding Machine Detial
1. LOG S8 Series Configuration Table:
■ Double cylinder injection system
■ Antifatigue, anti-corrosive screw and barrel
■ Injection, pressure-holding, storing, speed, pressure time multistage control
■ Postion or time hold on changeover
■ Screw position transducer control
■ To prevent the screw cold start function
■ Low speed high torque screw drive motor
■ Close loop barrel temperature control
■ The nozzle centre adjusting device
■ Screw speed detection device
■ Stainless steel hopper
■ Water cooling for hopper throat
■ Five points double toggle clamping unit
■ Open-close mould electronic ruler control
■ Mechanical safety device
■ Multi stage of mold open/close speed, pressure and position
■ Fast mold close
■ Automatic mold height adjustment
■ Low pressure mold-adjustment function
■ Box model platen: T slots
■ Auto centralized lubrication system
■ Propoffional pressure and speed control
■ Suction filter system
■ Oil temperature control and alarm
■ By-pass oil filter
1. Strengthen locking structure
Optimized special locking system to reach efficient and fast production
2. Professional templates optimized design
Template by advanced finite element analysis software to optimize design, high rigidity, high strength, to meet the rapid impact conditions demand.
3. Centralized lubrication, reliable protection
Configuring rational centralized lubrication, providing more professional, better lubrication to make machine more cleaner.
4. New type screw driving system
Spline connection for screw and oil motor, smooth and reliable transmission, big transfer torque, easy disassembly.
5. Powerful, friendly control system
Adopts professional controller and friendly interface, easy and fast operation, with good reliability.
6. Excellent injection performance
Double cylinder injection, entire floor-guided, reliable and stable.
7. Superior clamping system
Adopts optimized connection rod structure, faster and smoother operation.
8. New frame structure
Simple and generous appearance, machine body force reasonable and stronger.
9. Professional plasticizing system
Suitable for different types of plastic raw material with professional plasticizing and heating system, good plasticizing performance.
10. High efficient powerful servo system optional
Power system adopts high pressure gear box and servo motor, rotary encoder, pressure transducer and servo amplifier to get system closed-loop control.
2. LOG650S8 Machine Parameters:
|Shot weight (ps)||G||1966||2488||3072|
|Max injection rate||cm³/s||420||531||656|
|Screw L:D ratio||23.6:1||21:1||19:1|
|Space between tie bars||MmXmm||930*900|
|Mold thickness (Min--Max)||Mm||350-910|
|Hydraulic ejection stroke||Mm||265|
|Hydraulic ejection force||Kn||182|
|Hydraulic system pressure||Mpa||17.5|
|Number of temp control zones||6+ (nozzle)|
|oil tank capacity||L||1500|
3. The Machine
Here are the right price, first-class quality, professional technical and after-sales service.
LOG MACHINE, Be absorbed in good future!